WT11

السعر عند الطلب

الوصف

WT11 are water emulsion acrylic-based Textured coatings

العبوة	25 Kg in plastic pail
الرمز	WT11
Application Instruction — Mixing	Stir well before application in order to ensure that a uniform consistency is achieved
Application Instruction — Thinner / Cleaner	In general, there is no need to dilute, but if required 10% max by volume of water is added when application occurs by roller. Clean applying tools immediately after application is completed by water
Technical Information — Volume Solids	55,2 % (ASTM-D2697)
Technical Information — Flexibility	Very good
Technical Information — Recommended film thickness	250-1000 microns “dry”
التغطية (م²/لتر)	2.2 m²/L at 250 microns “dry”
Technical Information — Water resistance	Excellent
عدد الطبقات	1-2
زمن الجفاف	2 hours “minimum recoat time” (ASTM-D1640)
Drying Time — Note	Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times
Application Instruction — Application Temperature	10-40?C
Application Instruction — Note	When recoating, a special attention should be given toward drying times
Technical Information — VOC	8 g/L (ASTM-D3960)
Technical Information — Adhesion	Good
Technical Information — Specific gravity	1.60 kg/L (ASTM-D1475)