Strongcoat Primer
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
Strongcoat Primer is a two-pack, solvent-free epoxy-based primer for use with the DCP range of surface coatings and toppings
المواصفات
| الاستخدام | Strongcoat Primer is used as a prime coat to aid improving adhesion of subsequent epoxy layers. One or two coats should be applied depending on the texture, porosity and evenness of the surface being primed. |
| التغطية | Strongcoat Primer is applied at a coverage rate of 0.2 to 0.25 kg/m² to achieve a thickness of approximately 175 to 225 microns. Depending on the state of the substrate, a second coat may be required. Note |
| العبوة | Strongcoat Primer is available in 5 kg, 10 kg and 20 kg packs. |
| Storage | Store at temperatures between 5°C and 30°C. Approximately 24 months if stored in unopened containers and under good conditions. You might also be interested in Strongcoat EC10 Solvent based epoxy resin floor, wall and steel coating Strongcoat EP Coving Mortar Epoxy coving material for wall/floor surface joints Strongcoat Topping Trowelled epoxy floor screed Strongcoat HB Line High-build, solvent-free epoxy line marking paint with gloss finish We are here to answer any of your questions. Are you interested in a product or need advice? Contact us! We will be happy to advise you. Contact us Don C |