STOP200 Flex
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
Highly elastomeric two component putty based on acrylic emulsion resin and powder
المواصفات
| العبوة | Component A (powder):5 Kg in paper bag Component B (resin):0.8 Kg in plastic bottle |
| Application Instruction — Mixing Ratio | (by weight): -Brush:/Powder:5/Water:1/Resin:0.8 -Trowel:/Powder:5/Water:0.6/Resin:0.8 |
| Application Instruction — Mixing | Add the desired amount of fresh water, according to the method of application, into component A (powder) and mix thoroughly using a slow speed mixer. Then add the entire contents of component B (resin) (0.8 litre) slowly from the plastic bottle into the mixture and mix slowly in order to ensure that |
| Application Instruction — Pot life | 1 hour (higher temperatures will shorten the potlife sharply) |
| Application Instruction — Thinner / Cleaner | Clean applying tools immediately after application is completed by water |
| Technical Information — Volume Solids | (mixed)80 % (ASTM-D2697) |
| Technical Information — Flexibility | Excellent |
| Technical Information — Recommended film thickness | 0.5-1 mm (brush) and 1-2 mm (trowel) |
| التغطية (م²/لتر) | 1.6 m²/L at 0.5 mm “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Excellent |
| عدد الطبقات | 2, allow 10-15 minutes interval prior to applying the second coat |
| Application Instruction — Application Temperature | 5-40?C |
| Application Instruction — Note | When recoating, a special attention should be given toward drying time |
| Technical Information — VOC | 0 g/L (ASTM-D3960) |
| Technical Information — Adhesion | Very good |
| Technical Information — Specific gravity | 1.40 kg/L |