STOP200 Extra
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
A fast setting two-component putty based on acrylic emulsion resin and powder
المواصفات
| العبوة | Component A (powder):5 Kg in paper bag. Component B (resin):0.8 Kg in plastic bottle |
| Application Instruction — Mixing Ratio | (by weight): Powder:5 /Water:2 /Resin:0.8 |
| Application Instruction — Mixing | Add the desired amount of fresh water, according to the method of application, into component A (powder) and mix thoroughly using a slow speed mixer. Then add the entire contents of component B (resin)(0.8 litre) slowly from the plastic bottle into the mixture and mix slowly in order to ensure that |
| Application Instruction — Pot life | 7 minutes (higher temperatures will shorten the Application Time sharply). When temperature is higher than 25?C protect topping from rapid evaporation with damp burlap |
| Application Instruction — Thinner / Cleaner | Clean applying tools immediately after application is completed by water |
| Technical Information — Volume Solids | (mixed)80 % (ASTM-D2697) |
| Technical Information — Flexibility | Good |
| Technical Information — Recommended film thickness | up to 5 cm in one lift on horizontal surfaces.2 mm (minimum) and 7 mm (maximum) in one lift on vertical surfaces |
| التغطية (م²/لتر) | 0.4 m²/L at 2 mm “dry” |
| Technical Information — Water resistance | Very good |
| Technical Information — Abrasian Resistance | Good |
| عدد الطبقات | As required, allow to dry prior to applying the next coat |
| Drying Time — Note | Drying time can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Application Instruction — Application Temperature | 5-35?C |
| Application Instruction — Note | When recoating, a special attention should be given toward drying time |
| Technical Information — VOC | 0 g/L (ASTM-D3960) |
| Technical Information — Adhesion | Excellent |
| Technical Information — Specific gravity | “dry” 1.32 kg/L |
| Drying Time — Initial Setting | 20 minutes |