STOP200
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
A two component putty based on acrylic emulsion resin and powder
المواصفات
| العبوة | Component A (powder):5 Kg in paper bag Component B (resin):1 Kg in plastic can |
| الرمز | STOP200 |
| Application Instruction — Mixing Ratio | (by weight):Application:Brush/Powder:5/Water:1 to 1.2/Resin:1 Application:Trowel/Powder:5/Water:0.6 to 0.8/Resin:1 |
| Application Instruction — Mixing | Add the desired amount of fresh water, according to the method of application, into component A (powder) and mix thoroughly using a slow speed mixer. Then add the entire contents ofcomponent B (resin) 1kg slowly from the plastic bottle into the mixture and mix slowly in order to ensure that auniform |
| Application Instruction — Pot life | 1 hour (higher temperatures will shorten the potlife sharply) |
| Application Instruction — Thinner / Cleaner | : Clean applying tools immediately after application is completed by water |
| Technical Information — Volume Solids | (mixed)80% (ASTM-D2697) |
| Technical Information — Flexibility | Good |
| Technical Information — Recommended film thickness | 0.5 mm (brush) and 1mm (trowel) |
| التغطية (م²/لتر) | 1.6 m²/L at 0.5 mm “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Excellent |
| عدد الطبقات | 2 |
| Application Instruction — Application Temperature | 5-40?C |
| Application Instruction — Note | When recoating, a special attention should be given toward drying time |
| Technical Information — VOC | 0 g/L (ASTM-D3960) |
| Technical Information — Adhesion | Excellent |
| Technical Information — Specific gravity | “dry” 1.51 kg/L (ASTM-D1475) |