Setseal 1

السعر عند الطلب

الوصف

Setseal 1 is a highly effective and easily dispersed waterrepelling additive for sand /cement renders and screeds. The product is an aqueous dispersion of inorganic silicates. It is diluted with water before use and provides permanent waterproofing and reduced permeability of cement bound mixes throughout their entire mass.

المواصفات

Storage	Protect from frost and store under dry warehouse conditions at a temperature between 10°C and 30°C. 12 months in unopened, undamaged, sealed containers and stored under good conditions. You might also be interested in Strongcoat TX Texture extender additive Don Decorative Aggregates Decorative aggregates for terrazzo and stone carpet flooring systems Don Flakes Decorative polymer flakes for versatile surface finishes Antislip Aggregate Non slip flooring aggregates We are here to answer any of your questions. Are you interested in a product or need advice? Contact us! We will be happy to advise
Applications	The benefits of using Setseal 1 also include better resistance to chemical attack, increased frost resistance, and reduced efflorescence, all with no reduction in the strength. Setseal 1 may be used with Portland cement (ordinary and rapid hardening) and sulphate resisting cement. Setseal 1 renders are applied in two, three or four coats depending on the water pressures involved and the type of structure. Setseal 1 has also been used extensively for the waterproofing of basements, boiler houses, lift shafts, floors, retaining walls, swimming pools and water storage tanks.
Packaging	20 and 200 litre containers
Coverage	For all uses, dilute Setseal 1 with ten parts clean water. The following figures show the typical consumption of undiluted Setseal 1 for various applications: General waterproofer 1.5 litres per 50kg cement Wall render (damp) 1 litre for 2.5 - 3m² (2 coats total 13mm) Wall render (water pressure) 1 litre for 1.8 - 2.4m² (3 coats total 20mm) Wall render (heavy pressure) 1 litre for 1.2 - 1.5m² (25mm thick)