Nitro Finish
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
A luxurious one component nitrocellulose coating
المواصفات
| اللمسة النهائية | Gloss (ASTM-D523) |
| العبوة | 3.6 L or 0.9 L in metal can |
| Application Instruction — Mixing | Stir well before application in order to ensure that a uniform consistency is achieved |
| Application Instruction — Thinner / Cleaner | S505 “known as Retard” is used for thinning. Clean applying tools by thinner S501. Mixing ratio with thinner depends mainly on temperature.At 20°C: Conventional spray will need approx.3.3 litre S505 per 3.6L Nitro Finish coat |
| Technical Information — Volume Solids | 40.5 % "White" (ASTM-D2697) |
| Technical Information — Flexibility | Good |
| Technical Information — Recommended film thickness | 50 microns “dry” |
| التغطية (م²/لتر) | 8.1 m²/L at 50 microns “dry” (White) |
| Technical Information — Abrasian Resistance | Good |
| عدد الطبقات | 1-2 |
| زمن الجفاف | 30 minutes “minimum recoat time” (ASTM-D1640) |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Application Instruction — Note | When recoating, a special attention should be taken toward drying times |
| Technical Information — Specific gravity | 1.253 kg/L "White" (ASTM-D1475) |