HardTop Coat

السعر عند الطلب

الوصف

Two-component (A&B) acrylic polyurethane topcoat

المواصفات

اللمسة النهائية	High gloss (ASTM-D523)
العبوة	Component A 3.6 L in metal can. Component B 0.9 L in metal can
اللون	White or against order
Application Instruction — Mixing Ratio	(by volume) Comp.A Comp.B Thinner (S605 “known as ST/AD”) 4 1 0.75* *Note: Dilution by thinner S605 is recommended only if conventional spray application is used. No dilution is required for airless spray application
Application Instruction — Mixing	Stir well before application in order to ensure that a uniform consistency is achieved. Never mix more material than can be used within potlife. Material which has begun to set must be discarded
Application Instruction — Pot life	(20 °C) 2 hours (higher temperatures will shorten the potlife sharply)
Technical Information — Volume Solids	45 % (ASTM-D2697)
Technical Information — Flexibility	Excellent
Technical Information — Recommended film thickness	50 microns “dry”
التغطية (م²/لتر)	9 m²/L at 50 microns “dry”
Technical Information — Water resistance	Excellent
Technical Information — Abrasian Resistance	Excellent
Technical Information — Chemical Resistance	Good
Technical Information — Solvent Resistance	Very good
عدد الطبقات	1-2
Technical Information — Specific Gravity (mixed)	1.20 kg/L (ASTM-D1475)
زمن الجفاف	24 hours “minimum recoat time” (ASTM-D1640)
Drying Time — Fully Cured	7 days
Drying Time — Note	Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times
Application Instruction — Cleaner	Clean applying tools by thinner S507 “known as Acrysol”
Application Instruction — Note	Dilution by thinner S507 is recommended only if conventional spray application is used. No dilution is required for airless spray application
Technical Information — Solvent Splash and Spill Resistance	Very good