FRANJI Coat
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
FRANJI is a water emulsion PVA-based paint
المواصفات
| اللمسة النهائية | Flat (ASTM-D523) |
| العبوة | 18 kg in plastic pail or 25 kg in plastic pail |
| Application Instruction — Mixing | Stir well before application in order to ensure that a uniform consistency is achieved |
| Application Instruction — Thinner / Cleaner | Water is used for thinning or cleaning. Mixing ratio with water depends on temperature, method of application and substrate porosity. When recoating, a special attention should be given toward drying times |
| Technical Information — Volume Solids | 49 % (ASTM-D2697) |
| Technical Information — Flexibility | Good |
| Technical Information — Recommended film thickness | 50-100 microns “dry” |
| التغطية (م²/لتر) | 9.8 m²/L at 50 microns “dry” |
| عدد الطبقات | 2 |
| زمن الجفاف | 1 hour “minimum recoat time” (ASTM-D1640) |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperature will shorten the drying time |
| Application Instruction — Application Temperature | 10-40 ?. (Do not apply in freezing conditions) |
| Technical Information — VOC | 10.2 g/L (ASTM-D3960) |
| Technical Information — Adhesion | Good |
| Technical Information — Specific gravity | 1.70 kg/L (ASTM-D1475) |