Fire-Protect
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
Fire-Protect is a fire retardant paint based on especially modified synthetic resin
المواصفات
| العبوة | 3.6 L in US Gallon |
| Application Instruction — Mixing | Stir well before application in order to ensure that a uniform consistency is achieved |
| Application Instruction — Thinner / Cleaner | S305 “known as RUB thinner” is used for thinning and cleaning. Mixing ratio with S305 depends mainly on temperature and on method of application |
| Technical Information — Volume Solids | 50.3 % (Clear), 45.9% (White) (ASTM-D2697) |
| Technical Information — Flexibility | Very good |
| Technical Information — Recommended film thickness | 30-60 microns “dry” |
| التغطية (م²/لتر) | 16.8 m²/L (Clear), 15.3 m²/L (White) at 30 microns “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Good |
| Technical Information — Chemical Resistance | Good |
| Technical Information — Solvent Resistance | Fair |
| عدد الطبقات | 1 |
| زمن الجفاف | 24 hours “minimum recoat time” (ASTM-D1640) |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Application Instruction — Application Temperature | 10-40?C |
| Application Instruction — Note | When recoating, a special attention should be taken toward drying times. Temperature of substrate should be at least 3°C above the dew point of the air to avoid moisture condensation during application. Notes: -Never apply Fire-Protect over unclean or damp surfaces otherwise the applied coat could b |
| Technical Information — Specific gravity | 0.95 kg/L (Clear), 1.33 kg/L (White) (ASTM-D1475) |