EPX48

السعر عند الطلب

الوصف

EPX 48 is a two-component high-solid Phenol Novolac epoxy coating specially designed for lining tanks containing hot water and aqueous solutions up to 120°C

المواصفات

اللمسة النهائية	Semi gloss
العبوة	Component A: 3.6 liter in metal can Component B: 0.7 liter in metal can
اللون	Grey
الرمز	EPX48
Application Instruction — Mixing Ratio	By volume: 3.6 to 0.7 (A to B)
Application Instruction — Mixing	The individual components of EPX48 should be thoroughly stirred before the two are mixed together. Combine components (A & B) in supplied proportions and mix thoroughly using a slow speed mixer for at least 3 minutes to achieve uniform consistency; “DO NOT USE HIGH SPEED MIXER”. Never mix more mater
Application Instruction — Pot life	At 20°C: 30 minutes (higher temperatures significantly reduce pot life)
Application Instruction — Thinner / Cleaner	for most applications, no thinner is required. If thinning is necessary a minimal amount of S405 (also known as Epoxsol) can be used
Technical Information — Volume Solids	83.4%
Technical Information — Flexibility	Very good
Technical Information — Recommended film thickness	300 micron dry
التغطية (م²/لتر)	2.8 m²/ Liter at 300 microns dry thickness
Technical Information — Water resistance	Excellent
Technical Information — Abrasian Resistance	Excellent
Technical Information — Chemical Resistance	Excellent
Technical Information — Solvent Resistance	Good
عدد الطبقات	2
Technical Information — Specific Gravity (mixed)	1.55 kg/Litter
زمن الجفاف	8 hours “minimum recoat time”, 24 hours “maximum recoat time” (ASTM-D1640)
Drying Time — Fully Cured	7 days
Drying Time — Note	Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times
Application Instruction — Cleaner	S405 “known as Epoxsol”
Technical Information — Temperature Resistance	Dry continuous – 150°C Immersion continuous – 120°C