EPX33
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
EPX33 is a special food-grade two-component high-solid epoxy coating for lining potable water tanks
المواصفات
| اللمسة النهائية | Semi-Gloss (ASTM-D1523) |
| العبوة | Component A “base” 3.6 L in a metal can Component B “drier” 0.9 L in a metal can (CAT20) |
| اللون | Off-White |
| الرمز | EPX33 |
| Application Instruction — Mixing Ratio | (by volume) 3.6 to 0.9 (A to B) |
| Application Instruction — Mixing | The individual components of EPX33 should be thoroughly stirred before the two are mixed together. Combine components (A & B) in supplied proportions and mix thoroughly using a slow speed mixer for at least 3 minutes to achieve uniform consistency; “DO NOT USE HIGH SPEED MIXER”. Never mix more mater |
| Application Instruction — Pot life | At 20° C : 30 minutes (higher temperatures will shorten the pot-life sharply) |
| Application Instruction — Thinner / Cleaner | for most applications, no thinner is required. If thinning is necessary a minimal amount of S405 (also known as Epoxsol) can be used |
| Technical Information — Volume Solids | 89.8 % (ASTM-D2697) |
| Technical Information — Flexibility | Very good |
| Technical Information — Recommended film thickness | 250 microns “dry” |
| التغطية (م²/لتر) | 3.6 m²/L at 250 microns “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Very Good |
| Technical Information — Chemical Resistance | Very Good |
| عدد الطبقات | 2 |
| Technical Information — Specific Gravity (mixed) | 1.69 kg/L (ASTM-D1475) |
| زمن الجفاف | 8 hours “minimum recoat time”, 24 hours “maximum recoat time” (ASTM-D1640) |
| Drying Time — Fully Cured | 7 days |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Application Instruction — Cleaner | S405 "also known as Epoxsol" |
| Technical Information — VOC | 88 g/L (ASTM-D3960) |