EPX26
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
EPX 26 is a two-component high-solid self-leveling epoxy coating designed mainly for coating industrial floors
المواصفات
| اللمسة النهائية | Gloss (ASTM-D523) |
| العبوة | Component A “base” : 3.6 L in metal can or 14.4 L in metal drum. Component B “drier: CAT40” : 0.6 or 2.4 L in metal can |
| الرمز | EPX26 |
| Application Instruction — Mixing Ratio | (by volume) 3.6 to 0.6 (A to B) |
| Application Instruction — Mixing | The individual components should be thoroughly stirred before the two are mixed together. Combine components (A & B) in supplied proportions and mix thoroughly using a slow speed mixer for at least 3 minutes to achieve uniform consistency; “DO NOT USE HIGH SPEED MIXER”. Never mix more material than |
| Application Instruction — Pot life | (20° C) 30 minutes (higher temperatures will shorten the potlife sharply) |
| Application Instruction — Thinner / Cleaner | S405 “known as Epoxsol” is used for thinning or cleaning. Mixing ratio with thinner depends mainly on temperature and on method of application. For example: At 20°C airless spray or roller application will need approx 15% by volume thinner S405 |
| Technical Information — Volume Solids | 94.4 % (ASTM-D2697) |
| Technical Information — Flexibility | Very good |
| Technical Information — Recommended film thickness | 500-1000 microns “dry” |
| التغطية (م²/لتر) | 1.9 m²/L at 500 microns “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Excellent |
| Technical Information — Chemical Resistance | Very good. (A separate leaflet CHR01 is available) |
| Technical Information — Solvent Resistance | Good. (A separate leaflet CHR01 is available) |
| عدد الطبقات | 1-2 |
| Technical Information — Specific Gravity (mixed) | 1.60 kg/L (ASTM-D1475) |
| زمن الجفاف | 24 hours “minimum recoat time”, 2 days ”maximum recoat time” (ASTM-D1640) |
| Drying Time — Fully Cured | 7 days |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Technical Information — VOC | 48 g/L (ASTM-D3960) |
| Technical Information — Note | The use of CAT40 instead of CAT41 will lead to an increase in gloss, potlife, dry to touch and dry to handle times |