EPX19
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
EPX 19 is a two-component water-based coal tar epoxy
المواصفات
| اللمسة النهائية | Flat (ASTM-D523) |
| العبوة | Component A “base” 3.6 L in US Gallon Component B “drier” 0.55 L in US Quart |
| اللون | Black |
| الرمز | EPX19 |
| Application Instruction — Mixing Ratio | (by volume) 3.6 to 0.55 (A to B), Water is added after mixing |
| Application Instruction — Mixing | The individual components of EPX19 should be thoroughly stirred before the two are mixed together. Combine components (A & B) in supplied proportions and mix thoroughly using a slow speed mixer for at least 3 minutes until uniform consistency is achieved; “DO NOT USE HIGH SPEED MIXER”. Never mix mor |
| Application Instruction — Pot life | 4 hours (higher temperatures will shorten the Potlife sharply) |
| Application Instruction — Thinner / Cleaner | Water is used for thinning or cleaning. Mixing ratio with water depends mainly on temperature and on method of application.For example: At 20°C airless spray application will need no dilution.Other methods of application will need approx 15% by volume water.The higher the temperature the less the ne |
| Technical Information — Volume Solids | 77 % (ASTM-D2697) |
| Technical Information — Flexibility | Excellent |
| Technical Information — Recommended film thickness | 180 microns “dry” |
| التغطية (م²/لتر) | 4.2 m²/L at 180 microns “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Very good |
| Technical Information — Chemical Resistance | Good (A separate leaflet CHR01 is available) |
| Technical Information — Solvent Resistance | Fair (A separate leaflet CHR01 is available) |
| عدد الطبقات | 1 |
| Technical Information — Specific Gravity (mixed) | 1.65 kg/L (ASTM-D1475) |
| زمن الجفاف | 24 hours “minimum recoat time”, 2 days “maximum recoat time” (ASTM-D1640) |
| Drying Time — Fully Cured | 7 days |
| Application Instruction — Note | 1- When recoating, a special attention should be given toward drying times “minimum & maximum recoating time”. Any delay in applying interval coats may request sanding the surface of the previous coat to insure good adhesion. 2- Coated surfaces by EPX19 should not be exposed to water, chemicals, or |