EPX17
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
EPX 17 is a two-component water-based epoxy primer suitable for use on concrete surfaces, especially those with high humidity
المواصفات
| اللمسة النهائية | Flat (ASTM-D523) |
| العبوة | Component A : 3.6 L in metal can Component B “CAT71” : 0.55 L in metal can |
| اللون | White |
| الرمز | EPX17 |
| Application Instruction — Mixing Ratio | (by volume): 3.6 to 0.55 (A to B) |
| Application Instruction — Mixing | The individual components should be thoroughly stirred before the two are mixed together. Combine components (A & B) in supplied proportions and mix thoroughly, using a slow speed mixer, for at least 3 minutes to achieve uniform consistency; “DO NOT USE HIGH SPEED MIXER”. Never mix more material tha |
| Application Instruction — Pot life | 2 hours (higher temperatures will shorten the potlife sharply) |
| Application Instruction — Thinner / Cleaner | Water is used for thinning or cleaning. Mixing ratio with thinner depends mainly on temperature and on method of application. For example: At 20°C airless spray application will need no dilution. Other methods of application will need approx 15% by volume water. The higher the temperature the less t |
| Technical Information — Volume Solids | 66 % (ASTM-D2697) |
| Technical Information — Flexibility | Very good |
| Technical Information — Recommended film thickness | 50-100 microns “dry” |
| التغطية (م²/لتر) | 13.2 m²/L at 50 microns “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Very good |
| Technical Information — Chemical Resistance | Good (A separate leaflet CHR01 is available) |
| Technical Information — Solvent Resistance | Fair (A separate leaflet CHR01 is available) |
| عدد الطبقات | 1 |
| Technical Information — Specific Gravity (mixed) | 1.72 kg/L (ASTM-D1475) |
| زمن الجفاف | 36 hours “minimum recoat time”, 2 days “maximum recoat time” (ASTM-D1640) |
| Drying Time — Fully Cured | 7 days |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |