EPX08

السعر عند الطلب

الوصف

EPX 08 is a two-component high-solid special epoxy coating for lining tanks containing acids and alkalis in high concentrations at temperatures up to 80°C

المواصفات

اللمسة النهائية	Gloss (ASTM-D1523)
العبوة	Component A “base” 1.6 L in a metal can Component B “drier” 0.9 L in a metal can (CAT20)
اللون	Transparent
الرمز	EPX08
Application Instruction — Mixing Ratio	(by volume) 1.6 to 0.9 (A to B)
Application Instruction — Mixing	The individual components of EPX08 should be thoroughly stirred before the two are mixed together. Combine components (A &B) in supplied proportions and mix thoroughly using a slow speed mixer for at least 3 minutes to achieve uniform consistency; “DO NOT USE HIGH SPEED MIXER”. Never mix more materi
Application Instruction — Pot life	(20° C) 30 minutes (higher temperatures will shorten the pot life sharply)
Application Instruction — Thinner / Cleaner	for most applications, no thinner is required. If thinning is necessary a minimal amount of S405 (also known as Epoxsol) can be used
Technical Information — Volume Solids	82 % (ASTM-D2697
Technical Information — Flexibility	Very good
Technical Information — Recommended film thickness	500 microns “dry”
التغطية (م²/لتر)	1.65 m²/L at 500 microns “dry”
Technical Information — Water resistance	Excellent
Technical Information — Abrasian Resistance	Excellent
Technical Information — Chemical Resistance	Excellent
عدد الطبقات	2
Technical Information — Specific Gravity (mixed)	1.1 kg/L (ASTM-D1475)
زمن الجفاف	8 hours “minimum recoat time”, 24 hours “maximum recoat time” (ASTM-D1640)
Drying Time — Fully Cured	7 days
Drying Time — Note	Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times
Application Instruction — Cleaner	S405 "also known as Epoxsol"
Technical Information — Temperature Resistance	Excellent