EPX06
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
EPX 06 is a two-component solvent-free self-leveling epoxy coating
المواصفات
| اللمسة النهائية | High gloss (ASTM-D523) |
| العبوة | Component A “base” : 1.7 L in metal can or 6.8 L in metal drum. Component B “drier: CAT40” : 0.6 L or 2.4L in metal can |
| اللون | Available in major industrial colors using color mixing instrument Azmix |
| الرمز | EPX06 |
| Application Instruction — Mixing Ratio | (by volume) 1.7 to 0.6 (A to B) |
| Application Instruction — Mixing | The individual components should be thoroughly stirred before the two are mixed together. Component B “drier” should be poured into component A “base” container and mixed thoroughly using a slow speed mixer for at least 3 minutes to achieve uniform consistency; “DO NOT USE HIGH SPEED MIXER”. Never m |
| Application Instruction — Pot life | (20° C) 95 minutes (higher temperatures will shorten the potlife sharply) |
| Application Instruction — Thinner / Cleaner | Do not thin. Due to Potlife limitations, clean all mixing and applying tools by thinner S405 “known as Epoxsol” immediately after application is completed |
| Technical Information — Volume Solids | 100 % (ASTM-D2697) |
| Technical Information — Flexibility | Excellent |
| Technical Information — Recommended film thickness | 1-5 mm “dry” |
| التغطية (م²/لتر) | 1 m²/L at 1 mm “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Excellent |
| Technical Information — Chemical Resistance | Very good. (A separate leaflet CHR01 is available) |
| Technical Information — Solvent Resistance | Good. (A separate leaflet CHR01 is available) |
| عدد الطبقات | 1-2 |
| Technical Information — Specific Gravity (mixed) | 1.4 kg/L (ASTM-D1475) |
| زمن الجفاف | 24 hours “minimum recoat time”. 2 days ”maximum recoat time” (ASTM-D1640) |
| Drying Time — Fully Cured | 7 days |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Technical Information — Compressive Strength | 55.7±3.2 MPa |