EPX02
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
EPX 02 is a two-component multi-purpose high-build epoxy polyamine primer
المواصفات
| اللمسة النهائية | flat (ASTM-D-D523) |
| العبوة | : Component A “base”: 3.6 or 0.9 L in metal can. Component B “drier: CAT10”: 0.9 or 0.225 L in metal can |
| اللون | Gray |
| الرمز | EPX02 |
| Application Instruction — Mixing Ratio | (by volume) 4 to 1 (A to B) |
| Application Instruction — Mixing | The individual components should be thoroughly stirred before the two are mixed together. Combine components (A &B) in supplied proportions and mix thoroughly using a slow speed mixer for at least 3 minutes to achieve uniform consistency; “DO NOT USE HIGH SPEED MIXER”. Never mix more material than c |
| Application Instruction — Pot life | (20°C) 24 hours (higher temperatures will shorten the pot life sharply) |
| Application Instruction — Thinner / Cleaner | S405 “Known as Epoxsol” is used for thinning or cleaning. Mixing ratio with thinner depends mainly on temperature and on method of application. For example: At 20°C airless spray application will need no dilution. Conventional spray will need approx. 25% by volume thinner S405; Other methods of appl |
| Technical Information — Volume Solids | 58.9 % (ASTM-D2697) |
| Technical Information — Flexibility | Good |
| Technical Information — Recommended film thickness | 50 microns “dry” –As intermediate coat 100 microns “dry” –As primer |
| التغطية (م²/لتر) | 11.8 m²/L at 50 microns "dry" |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Excellent |
| Technical Information — Chemical Resistance | Good |
| Technical Information — Solvent Resistance | Fair |
| عدد الطبقات | One coat |
| Technical Information — Specific Gravity (mixed) | 1.408 kg/L (ASTM-D1475) |
| زمن الجفاف | 10 hours “minimum recoat time”, 24 hours “maximum recoat time” (ASTMD1640) |
| Drying Time — Fully Cured | 7 days |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Technical Information — Temperature Resistance | Up to 140°C |
| Technical Information — Weather Resistance | Excellent |