CRYL 2K
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
Two-component acrylic-urethane topcoat
المواصفات
| العبوة | Component A : 0.9 L in metal can. Component B : 0.45 L in metal can |
| اللون | The required color can be obtained from basic colors using Azmix program and according to the car factory code |
| Application Instruction — Mixing Ratio | (by volume) : Comp.A Comp.B Thinner (S601, S603, or S605) 2 1 0.75 Use appropriate thinner according to curing condition: S601 “known as SRT/Slow” used inside spraying booths (slow evaporation rate). S603 “known as SRT” used inside and outside spraying booths (medium evaporation rate recommended for |
| Application Instruction — Pot life | (20°C) 4 hours (higher temperatures will shorten the potlife sharply) |
| Technical Information — Flexibility | Excellent |
| Technical Information — Abrasian Resistance | Excellent |
| Technical Information — Chemical Resistance | Very good |
| Technical Information — Solvent Resistance | Very good |
| عدد الطبقات | Several coats to obtain opacity “allow 5-10 minutes to flash between coats” |
| زمن الجفاف | Thinner S601 45 minutes inside spraying booths at 60°C S603 45 minutes inside spraying booths at 60°C S605 4 hours outside spraying booths in cold weather (higher than 10°C) |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Application Instruction — Cleaner | Clean applying tools by S501 or S502 thinner |
| Substrate Treatment — Surface Preparation (repair area) | 1. Remove flecks of old paint with a scrapper, sandpaper, or SIP Paint Remover. 2. Remove dirt and water-soluble contaminants by washing with detergent and hot water solution. Rinse well and wipe surfaces thoroughly with a clean dry cloth. 3. Remove grease, oil and other contaminants with thinner (S |