C.RUBBER “RUB”
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
Chlorinated rubber based finishing coat
المواصفات
| العبوة | 3.6 L in metal can |
| Application Instruction — Mixing | Stir well before application in order to ensure that a uniform consistency is achieved |
| Application Instruction — Thinner / Cleaner | S305 “known as RUB thinner” is used for thinning and cleaning. Mixing ratio with S305 depends mainly on temperature and on method of application. At 20°C, conventional spray application will need approx. 2.25 litre S305 per Gallon RUB |
| Technical Information — Volume Solids | 47.5 % (ASTM-D2697) |
| Technical Information — Flexibility | Very good |
| Technical Information — Recommended film thickness | 100-200 microns “dry” (depends on environmental conditions) |
| التغطية (م²/لتر) | 4.75 m²/L at 100 microns “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Good |
| Technical Information — Chemical Resistance | Good |
| Technical Information — Solvent Resistance | Fair |
| عدد الطبقات | 2-3 |
| Technical Information — Specific Gravity (mixed) | 1.2 kg/L (ASTM-D1475) |
| زمن الجفاف | 24 hours “minimum recoat time” (ASTM-D1640) |
| Drying Time — Note | Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times |
| Application Instruction — Application Temperature | 10-40؛C |
| Application Instruction — Note | -When recoating, a special attention should be given toward drying times. -Temperature of substrate should be at least 3°C above the dew point of the air to avoid moisture condensation during application. Notice : -Never apply RUB over unclean and damp surfaces otherwise the applied coat could be re |