Coat ( E6, E7, E8)
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
A water reducible Alkyd finishing coat for exterior and interior use
المواصفات
| اللمسة النهائية | gloss (E6), semi-gloss (E7), and matt (E8) (ASTM-D523) |
| العبوة | 3.6 L in metal can |
| Application Instruction — Mixing | Stir well before application in order to ensure that a uniform consistency is achieved |
| Application Instruction — Thinner / Cleaner | Water is used for thinning and cleaning. Mixing ratio with water depends mainly on temperature, method of application, and surface condition.Approximately 10-15% of water are required for dilution |
| Technical Information — Volume Solids | 47% (E6), 34.6 % (E7), 37.3% (E8) (ASTM-D2697) |
| Technical Information — Flexibility | Good |
| Technical Information — Recommended film thickness | 40-60 microns “dry” |
| التغطية (م²/لتر) | 9.4 m²/L (E6), 6.9 m²/L (E7), 7.5 m²/L (E8) at 50 microns “dry” |
| Technical Information — Water resistance | Excellent |
| Technical Information — Abrasian Resistance | Good |
| عدد الطبقات | 2 |
| زمن الجفاف | 4 hours “minimum recoat time” (ASTM-D1640) |
| Application Instruction — Application Temperature | 10-40?C |
| Application Instruction — Note | When recoating, a special attention should be given toward drying times |
| Technical Information — VOC | 0 g/L (ASTM-D3960) |
| Technical Information — Specific gravity | 1.242 kg/L (E6), 1.3 kg/L (E7), 1.31 kg/L (E8) (DIN 51757) |
| Technical Information — Washability | Excellent |