AC putty

السعر عند الطلب

الوصف

One component nitrocellulose putty

العبوة	3.6 L or 0.9 L in metal can
Technical Information — Flexibility	Good
Technical Information — Recommended film thickness	200 microns maximum “dry, after sanding”
عدد الطبقات	several coats “allow to flash between coats”
زمن الجفاف	30 minutes
Drying Time — Note	Drying times can be affected by many factors such as temperature, ventilation and coat thickness. Higher temperatures will shorten the drying times
Application Instruction — Cleaner	Clean applying tools by S501 or S502 thinner
Technical Information — Adhesion	Good
Technical Information — Sandability	Excellent
Substrate Treatment — Surface Preparation	Well-prepared-surfaces is an essential condition of coating successfulness. In general, surface must be clean, dry, undamaged and free of all contaminants prior to coating. 1. Remove grease, oil and other contaminants with thinner (S100 or S501), then wipe surfaces thoroughly with a clean dry cloth.
Substrate Treatment — Recoating	Fine sanded AC putty should be coated by a suitable primer or surfacer such as AC surfacer or SYN203 primer or NCL Primer/Surfacer or SRT Primer/Surfacer (AC2) or OMEGAN Primer/Surfacer (2k) . Note: It is recommended to apply PE Putty (fine) instead of AC putty when finishing will be achieved by 2k-
Drying Time — Dry to Sand	2 hours “minimum recoat time”