1k Lacquer
السعر عند الطلب
كلّ منتجات المتجر ←
الوصف
Moisture curing one component polyurethane lacquer
المواصفات
| العبوة | 0.9 L or 3.6 L in metal can |
| Application Instruction — Mixing | Stir well before application in order to ensure that a uniform consistency is achieved |
| Application Instruction — Thinner / Cleaner | S507 “known as acrysol” can be used for thinning. Clean applying tools by thinner S501 |
| Technical Information — Volume Solids | 30 % "Gloss"; 22% "Matt" (ASTM-D2697) |
| Technical Information — Flexibility | Good |
| Technical Information — Recommended film thickness | 50-150 microns “dry” (Gloss); 50 microns “dry” (Matt) |
| التغطية (م²/لتر) | 6 m²/L (Gloss); 4.4 m²/L (Matt) at 50 microns “dry” |
| Technical Information — Water resistance | Excellent |
| عدد الطبقات | 1-3 (Gloss); 1 (Matt). The interval time between coats is 40 to 120min. If thicker coats are required (more than 100 microns dry), several layers must be applied. The minimum recoat time between layers is between 24 to 48 hours depending on film thickness, relative humidity and temperature. Sanding |
| زمن الجفاف | 24 hours “minimum recoat time” (ASTM-D1640) |
| Drying Time — Fully Cured | 7 days |
| Application Instruction — Note | When recoating, a special attention should be given toward drying times. Sanding is recommended in order to secure intercoat adhesion |
| Technical Information — Specific gravity | 1.02 kg/L "Gloss"; 0.95 kg/L "Matt" (ASTM-D1475) |